Checking and calibrating coating thickness gauges
Coating thickness gauges can be checked easily and reliably calibrated with high-quality reference blocks and calibration foils. Depending on the application and measuring range, ferromagnetic (Fe) and non-ferromagnetic (NFe) reference blocks of different sizes and a selection of suitable calibration foil sets are available. For special precision foil sets, the thickness tolerances are reduced even further. Upon request, calibration foils can be supplied with individual quality test certificates.

Reference Blocks

• Reference Block Fe
  (order no.: 2815.001)
• Reference Block NFe
  (order no.: 2815.003)
• Reference Block Fe, large
  (order no.: 2815.002)

Calibration Foils (recommended standard sets and blocks)

• Calibration Foil Set
  measuring range 0 mm – 300 µm, 2 pcs
  (order no.: 2715.992)
• Calibration Foil Set
  measuring range 0 mm – 1250 µm, 6 pcs
  (order no.: 2715.001)
• Calibration Foil Set
  measuring range 1250 mm – 4750 µm, 3 pcs
  (order no.: 2715.004)
• Calibration Foil Set
  measuring range 0.5 mm – 12.5 mm, 4 pcs
  (order no.: 2715.002)
• Precision Calibration Foil Set
  measuring range 0 µm – 1250 µm, 6 pcs
  (order no.: 2715.003)
• Calibration Block, 15 mm thickness
  measuring range 12.5 mm – 20 mm
  (order no.: 2715.151)

Certificates

• Calibration Foil Certificate, per foil
  (order no.: 2799.001)